- Delo Connection Manager has a uniform green halo light in the idle mode. This shows that it is available.
- When connecting one of the USB-C cables to a device the light will shine brighter in that section and the other parts will dim down to show that the cable is connected and charging.
- When connecting more of the USB-C cables to other devices the light will continue to shine brighter in those sections.
- When pressing one of the touch buttons on a connected port you will start screen sharing through HDMI-Ingest. Cameras, microphones and speakers will be connected to the MTR device. The light in that section will turn blue and the light will turn off in the other sections.
- When pressing another touch button on a connected port the screen sharing will switch to the other device. The light in that section will turn blue and the light will turn off in the other sections.
- If you want to access the cameras, speakers and microphones through your computer you can long press any button for 2 seconds to enter the BYOM-mode. The complete circle will pulse red a couple of times to indicate the mode switch.
- The light will be red instead of blue and you have access to cameras, microphones and speakers - as well as screen sharing.
- If you want to switch back to HDMI-Ingest you can long-press any button for 2 seconds. The circle will pulse blue a couple of times to indicate the mode has been switched and the MTR-device will take over control of the cameras, speakers and microphone. You will still share the screen.
- To stop sharing, just press one more time on the active touch button. The lights will go back to show which ports are connected.
- When all cables are disconnected the device will go back into idle mode.